Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

B6000 Kubota PTO can be adapted to standard rotation and "normal" size with a gear unit from a company called Hub City. The part number is 02-20-01402-022 and sells for around $500 as I recall. The unit bolts onto the transaxle where the 4 studs stick out. If you can't find a dealer locally, contact Messick Farm Equipment in Elizatbethtown, Pa (area code 717) and they can order. I don't have one on my tractor but seriously considered getting one. Good luck!
Kevin

Kubota b6000 tractor - need info
Kubota Tractors
Replies 9 Post by Kevin Walters

If you still need info on B6000 I have had one since last winter. Mine has a frontend loader and 5' woods finish mower made for counter rotation. Tractor will do much more work than it should! Used it to dig up a concrete patio complete with rebar and mesh around an inground swimming pool as well as to fill in the pool and do all the grading. Mower will mow up to about 8 inch grass and weeds fairly well--as well as a B1750 hydro. Turf tires can be installed if you buy new wheel for a B6100 and mount the correct size tires. Tractor is much heavier duty than the new BX series but has barely enough power. Has yet to not finish a job I started with it!
Email if you need any specific answers.
Kevin

Kubota B6000 PTO Speeds
Kubota Tractors
Replies 6 Post by Kevin Walters

Your loose shaft is not causing the problem. I have B6000 that runs fine with a lot of looseness in the shaft. You need to look at all the common diesel engine issues. They are really simple. You get fuel and air--they run. I would suggest first making sure the glow plugs work. These engines require a lot of preheating to get started. If they are working, check for clogged injectors. Good luck!

kubota 6000
Kubota Tractors
Replies 3 Post by Kevin Walters

Your in luck! A company called Hub City makes the unit you need. Part number is 02-20-01402-022 and I believe it is around $600 or so. If you can't find it locally call Messick Farm Equipment in Elizabethtown, Pennsylvania and they can order. This unit bolts right on the back of the transaxle and converts to correct rotation as well as changing to a 1 3/8-6spline shaft. Good luck!
Kevin

reverse rotation
Kubota Tractors
Replies 3 Post by Kevin Walters